製品仕様
| Product SKUs | |
|---|---|
| MBD-C2SBM-Q-O | C2SBM-Q (Standard Retail Pack) |
| MBD-C2SBM-Q-B | C2SBM-Q (Bulk Pack) |
| Physical Stats | |
| Form Factor | Micro ATX |
| Dimensions | 9.6" x 9.6 ", (24.4cm x 24.4cm) |
| Processor/Cache | |
| CPU | Single LGA775 Socket Supports Intel® Core™2 Extreme QX9000/QX6000 series Supports Intel® Core™2 Quad Q9000/Q8000/Q6000 series Supports Intel® Core™2 Duo E8000/E7000/E6000/E4000 series Supports Intel® Pentium® E5000/E2000 series Supports Intel® Celeron® E1000 and 400 series |
| System Bus | 1333 / 1066 / 800 MHz system bus |
| System Memory | |
| Memory Capacity | Four 240-pin DIMM sockets Supports up to 8 GB of unbuffered, non-ECC DDR2 800/667MHz memory (Dual Channel) |
| Memory Type | DDR2 800/667MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs |
| DIMM Sizes | 256 MB, 512 MB, 1 GB, 2 GB |
| Memory Voltage | 1.8V only |
| On-Board Devices | |
| Chipset | Intel® Q35 ICH9DO |
| Serial ATA | Intel® ICH9DO SATA2 (3 Gbps) controller built-in RAID 0, 1, 5, 10 support (Windows Only) RAID 0, 1, 10 support (Linux) |
| Network Controllers | 1 x Intel® 82566DM Single Port Gigabit PCI-Express Ethernet Supports 10 BASE-T, 100 BASE-TX, and 1000 BASE-T with RJ45 output |
| Audio | RealTek ALC883 High Definition 7.1 Channel Audio |
| Video | On board graphics |
| Super I/O | Winbond 83627DHG chip |
| Clock Generator | CK505 |
| Input / Output | |
| Serial ATA | Four Serial ATA ports ( 3Gbps performance) |
| IDE | One EIDE channel supports up to two UDMA IDE devices Supports UDMA Mode 5, PIO Mode 4, and ATA/100 |
| LAN | 1x RJ45 LAN port |
| USB | 11x USB 2.0/1.1 compliant (6x ports + 2x headers + 1 on-board connectors) 6 rear ports, 5 on-board |
| Audio | Line-in / Line-out / Microphone Ports |
| VGA | On board VGA port |
| Keyboard / Mouse | PS/2 keyboard and mouse ports |
| Serial Ports | 2x Fast UART 16550 serial port 2x Serial Header |
| Chassis ( Optimized for C2SBM-Q ) | |
| Mid-Tower | CSE-733E-465B CSE-733i-465B CSE-733i-645 CSE-733T-465B CSE-733T-645 CSE-733TQ-465B |
| Important Note | To ensure system stability, a 420W (minimum) ATX power supply [4-pin +12V AND (20 or 24-pin)] is required. |
| Expansion Slots | |
| PCI-Express | 1 (x16) PCI-e slot 1 (x4) (using x8) PCI-e slot |
| PCI | 2x 32-bit 33MHz PCI (5V) slots |
| System BIOS | |
| BIOS Type | 16Mb SPI Flash EEPROM with Phoenix BIOS® |
| BIOS Features | Plug and Play (PnP) DMI 2.3 PCI 2.2 ACPI 1.0 / 2.0 USB Keyboard support SMBIOS 2.3 |
| Management | |
| Software | Super Doctor IIIWatch Dog NMI |
| Power Configurations | ACPI/APM Power Management Main Switch Override Mechanism Wake-On-Ring (WOR) header Wake-On-LAN (WOL) header Keyboard Wakeup from Soft-Off Power-on mode control for AC power recovery Internal / External modem remote ring-on Suspend to RAM (STR) |
| PC Health Monitoring | |
| CPU | Monitors for CPU Cores, +1.8V, +3.3V, +5V, ±12V, +3.3V/+5V Standby, VBAT, HT, Memory, Chipset CPU Core 3-Phase-switching voltage regulator with auto-sense from 0.8375V-1.6000V Adjustable CPU clock frequency ratio (Only available if CPU is supported) |
| FAN | Total of three 4-pin fan headers 3 x fans with tachometer monitoring Status monitor for speed control Status monitor for on / off control Support 3-pin PWM fans (without speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan conn. |
| Temperature | Monitoring for CPU and chassis environment CPU thermal trip support Thermal Monitor 2 (TM2) Support PECI |
| LED | CPU / System Overheat LED Standby alert LED |
| Other Features | Chassis intrusion Detection Chassis intrusion Header TPM 1.2 |
| Operating Environment | |
| Environmental Spec. | Operating Temperature: 0° to 55°C Non-operating Temperature: -40° to 85°C Operating Relative Humidity: 15% to 95% (non-condensing) Non-operating Relative Humidity: 15 to 90% (non-condensing) |
キーワードから探す
CLOSE
