製品仕様
| Product SKUs | |
|---|---|
| MBD-X10SRM-TF | X10SRM-TF |
| Physical Stats | |
| Form Factor | microATX |
| Dimensions | 9.6" x 9.6" (24.38cm x 24.38cm) |
| Processor/Cache | |
| CPU | Intel® Xeon® Processor E5-1600 v3, Intel® Xeon® Processor E5-1600 v4, Intel® Xeon® processor E5-2600 v3, Intel® Xeon® processor E5-2600 v4. Single Socket R3 (LGA 2011) supported, CPU TDP support Up to 145W |
| Cores / Cache | Up to 22 cores † / Up to 55MB† cache |
| Note | † BIOS version 2.0 or above is required ** Motherboard supports this maximum TDP. Please verify your system can thermally support. |
| System Memory | |
| Memory Capacity | Up to 128GB Registered ECC RDIMM, DDR4-2400MHz; Up to 256GB Registered ECC LRDIMM, in 4 DIMM slotsUp to 512GB ECC 3DS LRDIMM |
| Memory Type | 2400/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit |
| DIMM Sizes | RDIMM: 4GB, 8GB, 16GB, 32GB LRDIMM: 32GB, 64GB 3DS LRDIMM: 128GB |
| Memory Voltage | 1.2V |
| Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
| On-Board Devices | |
| Chipset | Intel® C612 |
| SATA | Intel® C612 controller for 10 SATA3 (6 Gbps) ports; RAID 0,1,10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Controllers | Dual LAN with Intel® X550 10GBase-T Ethernet ControllerSupports 10Base-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
| Graphics | Aspeed AST2400 BMC |
| Input / Output | |
| SATA | 10 SATA3 (6Gbps) port |
| LAN | 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 6 USB 2.0 ports (2 rear + 4 headers) 5 USB 3.0 ports (2 rear + 2 headers + 1 Type A) |
| Video Output | 1 VGA port |
| Serial Port / Header | 2 COM Ports (1 rear, 1 header)2 fast UART 16550 serial |
| TPM | TPM Header |
| Expansion Slots | |
| PCI-E | 1 PCI-E 3.0 x16, 2 PCI-E 3.0 x8 |
| M.2 | Form Factor: 2242, 2280, 22110 |
| System BIOS | |
| BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 RTC (Real Time Clock) Wakeup |
| Management | |
| Software | Intel® Node Manager, IPMI2.0, KVM with dedicated LAN, NMI, SPM, SUM, SuperDoctor® 5, Watchdog |
| Power Configurations | ACPI Power Management Keyboard Wakeup from Soft-Off CPU Fan auto-off in sleep mode Power-on mode for AC power recovery |
| PC Health Monitoring | |
| Voltage | +12V, +3.3V, +5V, +5V standby, 6 -fan status, Chassis intrusion header, Monitors CPU voltages, Supports system management utility |
| FAN | 6x 4-pin fan headers (up to 6 fans), 6 fans with tachometer status monitoring, Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for on/off control, Status monitoring for speed control, System level control |
| Temperature | Monitoring for CPU and chassis environment, CPU thermal trip support, Thermal Monitor 2 (TM2) support, PECI, I2C temperature sensing logic |
| LED | CPU / System Overheat LED, Suspend static indicator LED, UID/Remote UID |
| Other Features | ACPI power management, Chassis intrusion detection, Chassis intrusion header, Chipkill support, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, Intel Smart Response Technology, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, Support 12v (only) DC input and 2x 4-pin HDD power connectors, UID, WOL |
| Operating Environment | |
| Operating Temperature Range | 0°C ~ 60°C (32°F ~ 140°F) |
| Non-Operating Temperature Range | -20°C ~ 60°C (-4°F ~ 140°F) |
| Operating Relative Humidity Range | 10% ~ 85% (non-condensing) |
| Non-Operating Relative Humidity Range | 10% ~ 95% (non-condensing) |
キーワードから探す
CLOSE
