サーバーマザーボード 販売終了

    X11SAN

    Pentium 4200Pentium N 販売終了

    製品仕様

    Product SKUs
    MBD-X11SANX11SAN
    Physical Stats
    Form Factor3.5" SBC
    Dimensions5.7" x 4.0" (14.6cm x 10.16cm)
    Processor/Cache
    CPUIntel® Pentium™ Processor N4200.
    Single Socket FCBGA1296 supported, CPU TDP support 6W
    System Memory
    Memory CapacityUp to 8GB Unbuffered non-ECC SO-DIMM, DDR3-1866MHz, in 1 DIMM slot
    Memory TypeDDR3L up to 1866Mhz 8GB
    DIMM Sizes2GB, 4GB, 8GB
    Memory Voltage1.35V
    On-Board Devices
    ChipsetSystem on Chip
    SATASoC controller for 1 SATA3 (6 Gbps) ports;
    Network ControllersDual LAN with Intel® Ethernet Controller I210-AT
    AudioALC 888S HD Audio
    GraphicsIntel® HD Graphics
    Input / Output
    SATA1 SATA3 (6Gbps) port
    LAN2 RJ45 Gigabit Ethernet LAN ports
    USB4 USB 2.0 ports (4 headers),
    2 USB 3.0 ports (2 rear),
    1 USB 3.1 ports
    Video Output1 VGA port, 1 48-bit LVDS port, 1 HDMI port
    Serial Port / Header4 COM Ports (4 headers), (2 RS232, 2 RS232/422/485, RS-485 supports Auto flow control)
    TPM1 TPM Chip
    Others1 HD Audio header (Mic-in/headphone-Out)(Audio only support at 0~60C)
    1 8-bit GPIO header
    1 SMBus header
    1 Panel backlight power header
    1 Speaker
    1 system Fan
    Expansion Slots
    PCI-E1 Full size Mini-PCI-E (USB2.0 1,PCI-E Gen2 x 1)
    1 M.2 2280 B-Key (PCI-E Gen2 x 1,SATA x 1)
    M.2M.2 Interface: SATA and PCI-E 2.0 x1 and USB 2.0
    Form Factor: 2280
    Key: B-Key
    System BIOS
    BIOS TypeAMI UEFI
    BIOS FeaturesPlug and Play (PnP)
    DMI 2.3
    ACPI 5.0
    SMBIOS 2.7.1
    UEFI 2.4
    Management
    SoftwareSuperDoctor® 5, Watchdog
    Power Configurations+12V DC Power Input
    ACPI Power Management
    Control of power-on for recovery from AC power loss
    Force Power On by Jumper
    PC Health Monitoring
    Voltage+1.35V, +12V, +3.3V, +5V, 3.3V standby, System level control, System temperature, VBAT, VCGI
    FAN1x 4-pin fan header (up to 1 fan), Fan speed control, Low noise fan speed control, PWM fan speed control, System level control, Thermal control tachometer fan connectors
    TemperatureCPU thermal trip support
    LEDStandby alert LED
    Other Features4-pin 12v DC power connector, ACPI power management, Control of power-on for recovery from AC power loss, CPU thermal trip support for processor protection, M.2 NGFF connector, RoHS, System level control, WOL
    Operating Environment
    Operating Temperature Range0°C ~ 60°C (32°F ~ 140°F)
    Non-Operating Temperature Range-40°C - 85°C (-40°F - 185°F)
    Operating Relative Humidity Range8% - 90% (non-condensing)
    Non-Operating Relative Humidity Range10% ~ 95% (non-condensing)

    複数条件から探す

    メーカー、筐体サイズ、仕様(CPU、CPUソケット数、最大GPU数)、特長・用途などから製品を探せます。

    キーワードから探す

    CLOSE

    サーバー・産業用PCに関するご相談・お見積りなど
    お気軽にお問い合わせをください。

    03-3815-9001 受付時間/平日9:30 〜 18:00