製品仕様
Product SKUs | |
---|---|
SYS-1018R-WR | SuperServer 1018R-WR (Black) |
Processor | |
CPU | Intel® Xeon® processor E5-2600 v4†/v3, E5-1600 v4†/v3 family(up to 145W TDP **) Single Socket R3 (LGA 2011) |
Core / Cache | Up to 22 Cores† / Up to 55MB† Cache |
Note | † BIOS version 2.0 or above is required ** Motherboard supports this maximum TDP. Please verify your system can thermally support |
System Memory | |
Memory Capacity | 8x 288-pin DDR4 DIMM slots Up to 1TB ECC 3DS LRDIMM Up to 512GB ECC LRDIMM Up to 256GB ECC RDIMM |
Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit, 288-pin (RDIMM / LRDIMM) / 284-pin gold-plated DIMMs |
DIMM Sizes | 3DS LRDIMM: 128GB LRDIMM: 64GB, 32GB RDIMM: 32GB, 16GB, 8GB, 4GB |
Memory Voltage | 1.2 V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices | |
Chipset | Intel® C612 chipset |
SATA | SATA3 (6Gbps) via C612 controller RAID 0, 1, 5, 10 support |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC with 10/100/1000Mbps |
Network Controllers | Intel® i350-AM2 Dual Port Gigabit Ethernet Virtual Machine Device Queues reduce I/O overhead Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output |
VGA | ASPEED AST2400 BMC |
Input / Output | |
SATA | 10x SATA3 (6Gbps) ports SATA DOM Power Connector |
LAN | 2x RJ45 Gigabit Ethernet LAN ports 1x RJ45 Dedicated IPMI LAN port |
USB | 2x USB 3.0 ports (rear) 2x USB 2.0 ports (rear) 2x USB 3.0 ports (front) |
VGA | 1x VGA port |
Serial Port / Header | 2x COM ports (1 rear, 1 header) |
DOM | 2x SuperDOM (Disk on Module) ports |
PC Health Monitoring | |
Voltage | Monitors for CPU Cores, +12V, +3.3V, +5V, +5V Standby, VBAT, HT, Memory, Chipset Voltages. 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V |
FAN | 6x 4-pin fan headers 4x fans w/ tachometer status monitoring Status monitor for speed control Status monitor for on/off control Support 3-pin fans (w/o speed control) Low noise fan speed control Pulse Width Modulated (PWM) fan connectors |
Temperature | Monitoring for CPU & chassis environment CPU thermal trip support FC temperature sensing logic Thermal Monitor 2 (TM2) support PECI |
LED | System Information LED +5V Standby alert LED |
Other Features | Chassis intrusion detection Chassis intrusion header |
Chassis | |
Form Factor | 1U Rackmount |
Model | CSE-514-R407W |
Dimensions and Weight | |
Height | 1.7" (43mm) |
Width | 17.2" (437mm) |
Depth | 16.9" (429mm) |
Package | 23.8" (W) x 8" (H) x 27" (L) |
Weight | Gross Weight: 27 lbs (12.25 kg) Net Weight: 15.5 lbs (7.03 kg) |
Available Colors | Black |
Front Panel | |
Buttons | Power On/Off button System Reset button |
LEDs | Power LED Hard drive activity LED 2x Network activity LEDs System Information LED |
Expansion Slots | |
PCI-Express | Left Riser: 2x PCI-E 3.0 x16 slots 1x PCI-E 3.0 x8 LP slot |
Drive Bays | |
Internal | 2x 2.5" fixed drive bays |
System Cooling | |
Fans | 4x 40x56mm PWM Cooling Fans 2x Optional fans for AOC cooling |
AC/DC240V Input Redundant Power Supplies | |
Total Output Power | 400W |
Dimension(W x H x L) | 54.5 x 40 x 220 mm |
Input | 100 - 240Vac / 6.0 - 3.0A / 50-60Hz 200 - 240Vdc / 3.4 - 3.2A (CCC Only) |
+12V | Max: 33A / Min: 0.5A |
+5V sb | Max: 3A / Min: 0A |
Output Type | Gold Finger Connector Mating with Molex 45984-4343 |
Certification | ![]() |
System BIOS | |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | Plug and Play (PnP) APM 1.2 DMI 2.3 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support Hardware BIOS Virus protection SMBIOS 2.7.1 UEFI 2.3.1 RTC (Real Time Clock) Wakeup |
Management | |
Software | IPMI (Intelligent Platform Management Interface) v2.0 with KVM support SuperDoctor® 5 Watch Dog |
Power Configurations | ACPI / ACPM Power Management Main Switch Override Mechanism Power-on mode for AC power recovery Internal/External modem ring-on |
Operating Environment / Compliance | |
RoHS | RoHS Compliant |
Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 70°C (-40°F to 158°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
ご注文から納品までの流れ「発注方法がわからない」「納品までの流れがイメージできない」そんな不安を解消いたします!
-
お問い合わせ
まずは、お電話またはお問い合わせフォームよりご連絡ください。
ご希望のサーバーやシステム構成、導入目的、台数、納期などについて、ヒアリングさせていただきます。以下の情報をお知らせいただければ、スムーズに製品提案が可能でございます。
・CPU (コア数,クロック数)
・メモリ (容量)
・ストレージ (SSD/HDD,SATA/SAS/NVMe, 容量, 本数)
・OS
・GPU等拡張カードの有無
・I/Oポート仕様
・保証期間 (センドバック対応が標準です。オンサイト保守をご希望の際はご指示ください。)
・希望納期お問い合わせ先
Tel:03-3815-9001
URL:https://www.sunwaytech.co.jp/contact/ -
ご提案・お見積り
お客様のニーズに合った最適なサーバーや構成をご提案し、お見積書を作成いたします。
技術的なご質問やカスタマイズのご要望にも柔軟に対応いたしますので、お気軽にご相談ください。 -
ご注文
お見積り内容にご納得いただけましたら、ご注文書をご提出ください。
ご注文後、正式な納期や手配状況をご案内いたします。 -
入荷検査・キッティング
海外メーカーよりサーバーが入荷後、弊社にて検品および動作確認を行います。
ご要望に応じて、初期設定やOSのインストールなども承ります。 -
納品
ご指定の場所へサーバーを発送いたします。
納品時に万が一トラブルが発生した場合も、迅速にサポートいたします。 -
アフターサポート
納品後も安心してご利用いただけるよう、サポート体制を整えております。
ご購入者様向けの会員サイトからRMA申請・修理状況の確認が可能です。サポート窓口
Tel:03-3815-9001
URL:https://member.sunwaytech.co.jp/login安心・確実なサーバー導入をサポートいたします!
まずはお気軽にお問い合わせください。