製品仕様
Product SKUs | |
---|---|
MBD-X10SDD-F | X10SDD-F |
Physical Stats | |
Form Factor | Proprietary |
Dimensions | 4.75" x 19.95" (12.07cm x 50.67cm) |
Processor/Cache | |
CPU | Intel® Xeon® Processor D-1541. Single Socket FCBGA1667 supported, CPU TDP support 45W |
System Memory | |
Memory Capacity | 128GB Registered ECC RDIMM Up to 64GB Unbuffered ECC/non-ECC UDIMM, DDR4-2133MHz, in 4 DIMM slots |
Memory Type | 2133/2400MHz ECC DDR4 RDIMM and ECC/Non-ECC UDIMM |
DIMM Sizes | 4GB, 8GB, 16GB, 32GB |
Memory Voltage | 1.2V |
Error Detection | Corrects single-bit errors Detects double-bit errors (using ECC memory) |
On-Board Devices | |
Chipset | System on Chip |
IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support |
Network Controllers | Intel® i350, 2x Gigabit LAN ports |
Graphics | Aspeed AST2400 BMC |
Input / Output | |
USB | 2 USB 2.0 ports (2 rear Type A)) 1 USB 3.1 Gen1 ports, 1 Type A); 2x USB 2.0 ports via KVM |
Video Output | 1 VGA port |
TPM | 1 TPM Header |
Expansion Slots | |
PCI-E | 1 PCI-E 3.0 x8 (Micro Low Profile), 1 PCI-E 3.0 x8 |
M.2 | 2 M.2 M-Key SATA/PCI-E 3.0 x4, 2242/2280/22110 |
System BIOS | |
BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
BIOS Features | ACPI 5.0 PCI FW 3.0 Plug and Play (PnP) UEFI 2.4 SMBIOS 2.8 USB Keyboard support |
Management | |
Software | Intel® Node Manager, IPMI (Intelligent Platform Management Interface) v2.0 with KVM support, IPMI2.0, KVM with dedicated LAN, NMI, SuperDoctor® 5, Watchdog |
Power Configurations | ACPI Power Management Main Switch Override Mechanism Power-on mode for AC power recovery |
PC Health Monitoring | |
Voltage | +12V, +3.3V, +5V, +5V standby, 1.2V (VDIMM), 3.3V standby, Memory, Memory Voltages, Monitors CPU voltages, Monitors for CPU Cores, Supports system management utility, System level control, System temperature |
FAN | 1x 4-pin fan header (up to 1 fan), Fan speed control, Low noise fan speed control, Overheat LED indication, Pulse Width Modulated (PWM) fan connectors, PWM fan speed control, Status monitoring for speed control, System level control, Thermal control tachometer fan connectors |
Temperature | N/A |
LED | N/A |
Other Features | ACPI power management, CPU thermal trip support for processor protection, Hyper-Speed Technology hardware acceleration, M.2 NGFF connector, Node Manager Support, RoHS, SDDC, System level control, UID, WOL |
Operating Environment | |
Operating Temperature Range | 0°C ~ 60°C (32°F ~ 140°F) |
Non-Operating Temperature Range | -20°C ~ 60°C (-4°F ~ 140°F) |
Operating Relative Humidity Range | 10% ~ 85% (non-condensing) |
Non-Operating Relative Humidity Range | 10% ~ 95% (non-condensing) |
キーワードから探す
CLOSE