1028U-TN10RT+
| 製品種別 | サーバ |
|---|---|
| CPUソケット数 | |
| CPU | |
| 筐体サイズ | |
| 最大GPU数 | |
| 電源仕様 | リダンダント電源 |
| 用途/特長 | |
| 製品説明 |
Supermicroについて
製品仕様
| Product SKUs | SYS-1028U-TN10RT+ | SuperServer 1028U-TN10RT+ (Black) |
|---|---|
| プロセッサ/キャッシュ | CPU | Intel® Xeon® processor E5-2600 v4†/v3 family(up to 160W TDP)* Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | † BIOS version 2.0 or above is required * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| メモリ | Memory Capacity | 24x 288-pin DDR4 DIMM slots Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM |
| Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 2666/2400 ECC DDR4 NVDIMM |
| DIMM Sizes | 64GB, 32GB, 16GB, 8GB, 4GB NVDIMM: 16GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| オンボードデバイス | Chipset | Intel® C612 chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Connectivity | 2 10GBase-T ports via AOC-URN6-i2XT Intel® X540 10GBase-T 1 Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | ASPEED AST2400 BMC |
| 標準インターフェース | NVMe/SAS | 6 NVMe ports (NVMe from CPU 1) 4 NVMe/SAS3** Hybrid ports (NVMe from CPU 2) |
| LAN | 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 5 USB 3.0 ports(2 rear, 2 front, 1 Type A) |
| Video | 1 VGA Connector |
| Serial Port | 1 Serial header |
| DOM | 2 SuperDOM (Disk on Module) ports |
| BIOS | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| マネージメント | Software | SuperDoctor® 5 Intel® Node Manager 3.0 Watch Dog NMI SUM and SSM Optional IPMI 1.5 / 2.0 |
| Power Configurations | ACPI Power Management Power-on mode for AC power recovery |
| Product SKUs | SYS-1028U-TN10RT+ | SuperServer 1028U-TN10RT+ (Black) |
| プロセッサ/キャッシュ | CPU | Intel® Xeon® processor E5-2600 v4†/v3 family(up to 160W TDP)* Dual Socket R3 (LGA 2011) |
| Cores / Cache | Up to 22 Cores† / Up to 55MB† Cache |
| System Bus | QPI up to 9.6 GT/s |
| Note | † BIOS version 2.0 or above is required * Please contact Supermicro Technical Support for additional information about frequency optimized CPUs and specialized system optimization. |
| メモリ | Memory Capacity | 24x 288-pin DDR4 DIMM slots Up to 3TB† ECC 3DS LRDIMM, 768GB ECC RDIMM |
| Memory Type | 2400†/2133/1866/1600MHz ECC DDR4 SDRAM 72-bit 2666/2400 ECC DDR4 NVDIMM |
| DIMM Sizes | 64GB, 32GB, 16GB, 8GB, 4GB NVDIMM: 16GB |
| Memory Voltage | 1.2 V |
| Error Detection | Corrects single-bit errors |
| オンボードデバイス | Chipset | Intel® C612 chipset |
| SATA | SATA3 (6Gbps) with RAID 0, 1, 5, 10 |
| IPMI | Support for Intelligent Platform Management Interface v.2.0 IPMI 2.0 with virtual media over LAN and KVM-over-LAN support ASPEED AST2400 BMC |
| Network Connectivity | 2 10GBase-T ports via AOC-URN6-i2XT Intel® X540 10GBase-T 1 Realtek RTL8211E PHY (dedicated IPMI) |
| Graphics | ASPEED AST2400 BMC |
| 標準インターフェース | NVMe/SAS | 6 NVMe ports (NVMe from CPU 1) 4 NVMe/SAS3** Hybrid ports (NVMe from CPU 2) |
| LAN | 2 RJ45 10GBase-T ports 1 RJ45 Dedicated IPMI LAN port |
| USB | 5 USB 3.0 ports(2 rear, 2 front, 1 Type A) |
| Video | 1 VGA Connector |
| Serial Port | 1 Serial header |
| DOM | 2 SuperDOM (Disk on Module) ports |
| BIOS | BIOS Type | 128Mb SPI Flash EEPROM with AMI BIOS |
| BIOS Features | Plug and Play (PnP) APM 1.2 PCI 2.3 ACPI 1.0 / 2.0 / 3.0 / 4.0 USB Keyboard support SMBIOS 2.7.1 UEFI 2.3.1 |
| マネージメント | Software | SuperDoctor® 5 Intel® Node Manager 3.0 Watch Dog NMI SUM and SSM Optional IPMI 1.5 / 2.0 |
| Power Configurations | ACPI Power Management Power-on mode for AC power recovery |
| シャーシ | Form Factor | 1U Rackmount |
| Model | CSE-119UAC2-R1K02 |
| 外形寸法・重量 | Height | 1.7" (43mm) |
| Width | 17.2" (437mm) |
| Depth | 28.5" (724mm) |
| Gross Weight | 48 lbs (21.8 kg) |
| Available Color | Black |
| フロントパネル | Buttons | Power On/Off button System UID button |
| LEDs | Power LED Hard drive activity LED 2x Network activity LEDs UID LED |
| 拡張スロット | PCI-Express | 3 PCI-E 3.0 x8 slots(2 Full-height 10.5" L; 1 Low-profile)(Both CPUs need to be installed for full access to PCI-E slots and onboard controllers. See manual block diagram and AOC Support for details.) |
| ドライブベイ | Hot-swap | 10x 2.5" Hot-swap drive bays 6 NVMe ports (NVMe from CPU 1) 4 NVMe/SAS3 hybrid ports for optional SAS3/SATA3** (NVMe from CPU 2)** Note: SAS3/SATA3 support requires additional parts in optional parts list |
| 冷却機構 | Fans | 8 heavy duty fans with optimal fan speed control |
| Air Shroud | 1 Air Shroud |
| 電源 | Total Output Power | 800W: 100 – 127Vac 1000W: 200 – 240Vac 1000W: 200 – 240Vdc (for CCC only) |
| Dimension(W x H x L) | 73.5 x 40 x 203 mm |
| Input | 100-127Vac / 9.8 - 7A / 50-60Hz 200-240Vac / 7 - 5A / 50-60Hz 200-240Vdc / 7 - 5A (for CCC only) |
| +12V | Max: 66.7A / Min: 0A (100-127Vac) Max: 83A / Min: 0A (200-240Vac) Max: 83A / Min: 0A (200-240Vdc) |
| 12Vsb | Max: 2.1A / Min: 0A |
| Output Type | 25 Pairs Gold Finger Connector |
| Certification | Titanium Level [ Test Report ] |
| システム監視機能 | Voltage | Monitors for CPU Cores, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, +5V Standby, VBAT, Memory Voltages. 5+1 Phase-switching voltage regulator |
| FAN | 8x 4-pin fan headers Status monitor for speed control Pulse Width Modulated (PWM) fan connectors |
| Temperature | Support to monitor Supermicro AOC temperatures from IPMI or SD 5 Monitoring for CPU and chassis environment CPU thermal trip support Thermal Control for 8x Fan Connectors Thermal Monitor 2 (TM2) support PECI |
| LED | Memory DIMM ECC error LEDs CPU / System Overheat LED Suspend static indicator LED UID/Remote UID |
| Other Features | 4x 8-pin GPU power connectors Chassis intrusion detection Chassis intrusion header SDDC Support RoHS |
| 動作環境/コンプライアンス | RoHS | RoHS Compliant |
| Environmental Spec. | Operating Temperature: 10°C to 35°C (50°F to 95°F) Non-operating Temperature: -40°C to 60°C (-40°F to 140°F) Operating Relative Humidity: 8% to 90% (non-condensing) Non-operating Relative Humidity: 5% to 95% (non-condensing) |
パーツ仕様
| パーツリスト | |||
|---|---|---|---|
| 型番 | 数量 | 内容 | |
| Motherboard / Chassis | MBD-X10DRU-i+ | 1 | Super X10DRU-i+ Motherboard |
| Motherboard / Chassis | CSE-119UAC2-R750 | 1 | CSE-119UAC2-R750 Chassis |
| Air Shroud | MCP-310-81903-0B | 1 | Mylar air shroud set for SC819U,119U (X10DRU+),HF |
| Add-on Card / Module | AOC-URN6-I2XT-P | 1 | AOC-URN6-I2XT |
| Backplane | BPN-SAS3-116A-N10 | 1 | 10-Port Hybrid Backplane Supports 6 x 2.5" NVMe/PCIe SSD and 4 x 2.5" NVMe/SAS/SATA Storage Devices |
| Cable 1 | CBL-PWEX-0781 | 1 | PWR EXT,2X4F/P4.2 TO TWO 2X2F/P4.2,CPU(5,12V),65/65CM,18AWG,RoHS/REACH |
| Cable 2 | CBL-SAST-0819 | 3 | OCuLink v.91,INT,PCIe NVMe SSD, 65CM,34AWG |
| Cable 3 | CBL-CDAT-0728 | 2 | 4 Pin to 4 Pin I2C cable, 65cm, 26AWG, 4 wires, pinout 1-1, for vpp header(jnvi2c1),RoHS/REACH |
| Cable 4 | CBL-SAST-0818 | 5 | OCuLink v.91,INT,PCIe NVMe SSD, 55CM,34AWG |
| Cable 5 | CBL-PWEX-0780 | 1 | PWR EXT,2X4F/P4.2 TO TWO 2X2F/P4.2,CPU(5,12V),40/40CM,18AWG,RoHS/REACH |
| Cable 6 | CBL-SAST-0820 | 2 | OCuLink v.91,INT,PCIe NVMe SSD, 85CM,34AWG |
| Parts | MCP-130-81901-0N | 1 | Oculink cable connection plastic holder for AOC-URN6-i2XT |
| Label | LBL-0108 | 1 | CAUTION LABEL FOR REDUNDANT PWR SYSTEMS |
| Manual | MNL-1812-QRG | 1 | QRG for SYS-1028U-TN10RT+ |
| Riser Card | RSC-R1UW-E8R | 1 | RSC-R1UW-E8R-O-P |
| Riser Card | RSC-UN4-88 | 1 | RSC-UN4-88 |
| Heatsink / Retention | SNK-P0057PSU | 2 | 1U Passive CPU Heat Sink for X10 1U 24-DIMM Ultra and Super Blade Series Servers,RoHS/REACH |
| Power Supply | PWS-1K02A-1R | 2 | 1U 1000W Redundant Power Supply 73.5mm width Titanium Level,RoHS/REACH |
| オプションパーツリスト | |||
| 型番 | 数量 | 内容 | |
| Storage Control Card and Cable(s) | AOC-S3008L-L8e | Std LP, 8 internal ports, 12Gb/s per port- Gen3, 122HDD, HBA | |
| Storage Control Card and Cable(s) | AOC-S3008L-L8i | Std LP, 8 internal ports, 12Gb/s per port- Gen3, 63HDD, RAID 0,1,1E | |
| Storage Control Card and Cable(s) | AOC-S3108L-H8iR | Std LP, 8 internal ports, 12Gb/s per port- Gen3, 240HDD, RAID 0, 1, 5, 6, 10, 50, 60 | |
| Network Card(s) | AOC-S40G-i2Q | Standard LP 2-port 40GbE controller, based on Intel Fortville XL710 | |
| Network Card(s) | AOC-SGP-i2 | Standard LP, 2x GbE RJ45, PCI-E x4, Intel i350AM2 | |
| Network Card(s) | AOC-SGP-i4 | Standard LP, 4x GbE RJ45, PCI-E x4, Intel i350 | |
| Network Card(s) | AOC-STG-b4S | Standard LP, 4x 10GbE SFP+, PCI-E x8, Broadcom BCM57840S | |
| Network Card(s) | AOC-STGN-i2S | Standard LP, 2x 10GbE SFP+, PCI-E x8, Intel 82599ES | |
| Network Card(s) | AOC-STGN-i1S | Standard LP, 1x 10GbE SFP+, PCI-E x8, Intel 82599EN | |
| Network Card(s) | AOC-STG-i2T | Standard LP, 2x 10GbE RJ45, PCI-E x8, Intel X540 | |
| Network Card(s) | AOC-STG-i2 | Standard LP, 2x 10GbE CX4, PCI-E x8, Intel 82598EB | |
| CachVault(s) | BTR-CV3108-1U1 | CacheVault for LSI 3108 with Supercap mounting in 1U 40x56 fan tray | |
| CachVault(s) | BTR-TFM8G-LSICVM02 & BKT-BBU-BRACKET-05 | CacheVault for LSI 3108; Supercap mounting bracket for PCI-E location | |
| CachVault(s) | BTR-TFM8G-LSICVM02 & MCP-240-00127-0N | CacheVault for LSI 3108; Supercap mounting bracket for 2.5" HDD location | |
| Drive Tray(s) | MCP-220-00047-0B | Black gen 3rd hot-swap 2.5" HDD tray | |
| Onsite Service Program | OS4HR3/2/1 | 3/2/1-year onsite 24x7x4 service | |
| Onsite Service Program | OSNBD3/2/1 | 3/2/1-year onsite NBD service | |
| Software | SFT-OOB-LIC | 1 | OOB Management Package (per node license) |
| Software | SFT-DCMS-Single | 1 | DataCenter Management Package (per node license) |
