M1D2-5500G0V(500W)
| 製品種別 | 電源 (Zippy) |
|---|---|
| 電源の種類 | 2U Redundant |
| 製品説明 |
製品仕様
| wattage | 500W |
|---|---|
| solution | Server ,Workstation ,Storage System ,IPC ,Blade server ,PCs ,Communication ,Networking |
| dimension_mm | 170x101.2x84 |
| dimension_inch | 6.69x3.98x3.31 |
| input_spec | VOLTAGE： 90～264 Vac FULL RANGE FREQUENCY： 47～63 Hz INPUT CURRENT：8A (RMS) FOR 115V / 4A (RMS) FOR 230V INRUSH CURRENT：15A MAX. FOR 115V / 30A MAX. FOR 230V PFC: Up to the target of 95% @115V, full load. |
| dc_output |
* TOTAL POWER: 500W (MAX) |
| features | * TEMPERATURE RANGE：OPERATING 0℃～50℃, STORAGE -20℃~80℃ * EFFICIENCY: THE MAXMUM POWER SUPPLY SYSTEM EFFICIENCY SHALL BE 88%, MEASURED AT NOMINAL INPUT VOLTAGE 115V OR 230V AND FULL LOADING. * LEAKAGE CURRENT: 3.5 MA. MAX. AT NOMINAL VOLTAGE 240VAC * REMOTE ON/OFF CONTROL * OVER POWER PROTECTION：Trigger point total power MIN. 110%, MAX. 150%. * OVER VOLTAGE PROTECTION * SHORT CIRCUIT PROTECTION * OVER CURRENT PROTECTION * LEAKAGE CURRENT: From line to ground will be less than 3.5mA rms. Measurement will be made at 240 VAC and 60Hz. * SAFETY: TO MEET UL, CUL, TUV, CCC * WARNING METHOD: AUDIO ALARM(BUZZER SOUND, RESETABLE), FALUT LED, TTL * THE POWER-SUPPLY IS FOR CHASSIS-ASSEMBLY ONLY AND IS NOT ALLOWED TO BE OPERATED AS STAND-ALONE COMPONENT. FINAL ASSEMBLY HAS TO COMPLY WITH CORRESPONDING EMC- AND SAFETY-REGULATIONS. |
