製品情報

H273-Z84-AAW1 (rev. 3.x)

製品種別 サーバ
CPUソケット数 2
CPU  
 
筐体サイズ 2U
最大GPU数
電源仕様 リダンダント電源
用途/特長  
製品説明
2U 4ノードリアアクセスサーバーシステム
ノードあたりデュアルAMD EPYC™ 9005/9004シリーズ・プロセッサー
12チャネルDDR5 RDIMM、ノードあたり24 x DIMM
デュアルROMアーキテクチャ
Intel® I350-AM2経由1Gb/秒LANポート x 8
2.5 "Gen5NVMe/SATA/SAS-4ホットスワップベイ×24基
4 x M.2スロット(PCIe Gen4 x4インターフェイス)(オプション)
LP PCIe Gen5 x16スロット x 8
4 x OCP NIC 3.0 PCIe Gen5 x16スロット
デュアル3000W 80 PLUS Titaniumリダンダント電源

AMD 第4世代 EPYC 9004シリーズについて


製品仕様

Dimensions (WxHxD, mm) 2U 4-Node - Rear access
440 x 87.5 x 877
Motherboard MZ83-HD2
CPU AMD EPYC™ 9005 Series Processors
AMD EPYC™ 9004 Series Processors

Dual processor per node, cTDP up to 240W

[Note] If only 1 CPU is installed, some PCIe or memory functions might be unavailable.
Socket 8 x LGA 6096
Socket SP5
Chipset System on Chip
Memory 96 x DIMM slots
DDR5 memory supported
12-Channel memory architecture

AMD EPYC™ 9005:
RDIMM: Up to 6000 MT/s

AMD EPYC™ 9004:
RDIMM: Up to 4800 MT/s
LAN Rear (I/O board - CLBH160 x 4):
8 x 1Gb/s LAN (4 x Intel® I350-AM2)
- Support NCSI function

4 x 10/100/1000 Mbps Management LAN [1]

[1] Spanning Tree Protocol (STP) must be enabled on LAN switches when using a ring topology.
Video Integrated in Aspeed® AST2600 x 4
- 4 x Mini-DP
Storage Front hot-swap:
24 x 2.5" Gen5 NVMe/SATA/SAS-4 [1]
- (NVMe from CPU_1)
- (SATA from CPU_0)

Optional internal M.2 (CMTP192 x 4):
4 x M.2 (2280/22110), PCIe Gen4 x4, from CPU_0

[1] SAS card is required to support SAS drives.
SAS Require SAS add-in cards
RAID Require RAID add-in cards
PCIe Expansion Slots Riser Card CRSH01Q x 4:
- 4 x LP x16 (Gen5 x16), from CPU_0

Riser Card CRSH01R x 4:
- 4 x LP x16 (Gen5 x16), from CPU_0

4 x OCP NIC 3.0 (Gen5 x16), from CPU_0
- Support NCSI function
Front I/O 4 x Power buttons with LED
4 x ID buttons with LED
4 x Reset buttons
4 x System status LEDs
1 x CMC status LED
1 x CMC reset button
Rear I/O I/O board - CLBH160 x 4:
8 x USB 3.2 Gen1 ports (Type-A)
4 x Mini-DP
8 x RJ45 ports
4 x MLAN ports
4 x System status LEDs
Backplane Board Speed and bandwidth:
PCIe Gen5 x4 or SATA 6Gb/s or SAS-4 24Gb/s
Security Modules 4 x TPM headers with SPI interface
- Optional TPM2.0 kit: CTM010
Power Supply Dual 3000W 80 PLUS Titanium redundant power supply [1]

AC Input:
- 100-127V~/ 16A, 50/60Hz
- 200-207V~/ 16A, 50/60Hz
- 208-240V~/ 16A, 50/60Hz

DC Input: (Only for China)
- 240Vdc/ 16A

DC Output:
- Max 1200W/ 100-127V~
+12.2V/ 98.36A
+12.2Vsb/ 3A
- Max 2600W/ 200-207V~
+12.2V/ 213A
+12.2Vsb/ 3A
- Max 3000W/ 208-240V~ or 240Vdc Input
+12.2V/ 245.9A
+12.2Vsb/ 3A

[1] The system power supply requires C19 power cord.
System Management Aspeed® AST2600 Baseboard Management Controller
Aspeed® AST2520 Chassis Management Controller
GIGABYTE Management Console web interface

  • Dashboard
  • HTML5 KVM
  • Sensor Monitor (Voltage, RPM, Temperature, CPU Status …etc.)
  • Sensor Reading History Data
  • FRU Information
  • SEL Log in Linear Storage / Circular Storage Policy
  • Hardware Inventory
  • Fan Profile
  • System Firewall
  • Power Consumption
  • Power Control
  • Advanced power capping
  • LDAP / AD / RADIUS Support
  • Backup & Restore Configuration
  • Remote BIOS / BMC / CPLD Update
  • Event Log Filter
  • User Management
  • Media Redirection Settings
  • PAM Order Settings
  • SSL Settings
  • SMTP Settings
OS Compatibility Please refer to OS compatibility table in support page
System Fans 4 x 80x80x80mm (16,500rpm)
Operating Properties Operating temperature: 10°C to 35°C
Operating humidity: 8-80% (non-condensing)
Non-operating temperature: -40°C to 60°C
Non-operating humidity: 20%-95% (non-condensing)
Packaging Dimensions 1179 x 700 x 380 mm
Packaging Content 1 x H273-Z84-AAW1
8 x CPU heatsinks
1 x Mini-DP to D-Sub cable
1 x 3-Section Rail kit
Part Numbers - Barebone package (EPYC 9005/9004): 6NH273Z84DR000ACW1*
- Barebone package (EPYC 9005/9004): 6NH273Z84DR000ABW1*
- Barebone package (EPYC 9004): 6NH273Z84DR000AAW1*
- Motherboard: 9MZ83HD2UR-000-3*
- 3-Section Rail kit: 25HB2-A66125-K0R
- CPU heatsink: 25ST1-25320N-M1R/25ST1-25320Q-M1R
- Front panel board - CFPH004: 9CFPH004NR-00*
- Backplane board - CBPH0O8: 9CBPH0O8NR-00*
- Fan module: 25ST2-888020-S1R
- Riser card - CRSH01Q: 9CRSH01QNR-00*
- Riser card - CRSH01R: 9CRSH01RNR-00*
- I/O board - CLBH160: 9CLBH160NR-00*
- Mini-DP to D-Sub cable: 25CRN-200801-K1R
- Power supply: 25EP0-230009-L0S

Optional parts:

- C19 power cord 125V/15A (US): 25CP1-018000-Q0R
- C19 power cord 250V/16A (EU): 25CP3-01830H-Q0R
- C19 power cord 125V/15A (JP): 25CPA-01830B-Q0R
- M.2 expansion card - CMTP192: 9CMTP192NR-00*